Tesla’s Radiant Energy

This part is provided to aid in the necessary understanding of the relationship between normal electricity, Radiant energy and Cold Electricity.


Tesla's Radiant Energy - Cold Electricity from Tesla Coils:

By replacing the Spark Gap in the Tesla Coil Circuit with a Vacuum Tube, we still generate Cold Electricity.

In 1890 Tesla developed a powerful method by which he hoped to generate and detect real electromagnetic waves, instead he discovered a new pulsating unidirectional wave he called Radiant Energy.  His apparatus required the use of a DC dynamo and a very powerful capacitor bank which was charged to very high voltages, and  subsequently discharged through a pulsating arc. The explosive bursts thus obtained produced several phenomena, which deeply impressed Tesla, far exceeding the power of any electrical display he had ever seen it produced more than a thousand times the input energy from his dynamo.

Tesla devised a new series of experiments to measure the shockwave pressure from the pulsating discharges at a greater distance. He required an automatic "trip switch"(his magnetic disrupter). With this properly arranged, a more controlled and repetitious triggering of the effect was possible. In addition, this arrangement permitted distant observations which might cast more light on the shield-permeating phenomenon.   The speed of his high voltage dynamo controlled the voltage. With these components properly adjusted, Tesla was able to walk around his large gallery spaces and make observations.

After a period of intense experimentation and design development, Tesla summarized the components necessary for the practical deployment of a Radiant electrical power distribution system (to broadcast electricity). Tesla had already discovered the fact that impulse durations of 100 microseconds or less could not be sensed and would do no physical harm. He planned to use this method in his power broadcast. Furthermore, pulsating waves of 100 microsecond duration passed through all matter, a fitting form of electrical energy to broadcast throughout a power-needy city.  It is not known how this broadcast electricity would impact today’s modern electronics.

Tesla made a most startling discovery the same year, when he placed a single turn copper helix pipe near his magnetic disrupter that creates the arc. The coil, some two feet in length, did not behave as did solid copper pipes and copper bar, growing to its maximum voltage value. If all values in the circuit were properly balanced, in the manner prescribed by Tesla, a sudden charge collapse would then occur. This collapse was necessarily very much shorter than the interval required to charge the hoop.  The collapse comes when his magnetic disrupter quickly extinguished the arc pulling off electrons. If the circuit is properly structured, no backrush alternations will occur.  This unidirectional succession of charge-discharge impulses causes a very strange field to expand outward, one, which vaguely resembles a “stuttering” or “staccato” electrostatic field.  But these terms did not satisfactorily describe the conditions actually measured around the apparatus, a powerful radiant effect exceeding all expectable electrostatic values. Actual calculation of these discharge ratios proved impossible.  Implementing the standard magneto-inductive transformer rule, Tesla was unable to account for the enormous voltage multiplication effect. Conventional relationships failing, Tesla hypothesized that the effect was due entirely to radiant transformation rules, obviously requiring empirical determination.  Subsequent measurements of the coil discharge lengths and helix attributes provided the necessary new mathematical relationship.  He had discovered a new induction law, one where radiant shockwaves actually auto-intensified when encountering segmented objects (such as the two foot coil). The segmentation was the key to releasing the action. Radiant shockwaves encountered a helix and "flashed over" the outer skin, from end to end. This shockwave did not pass through the windings of the coil at all, treating the coil surface as an aerodynamic plane. A consistent increase in electrical pressure was measured along the coil surface.  Indeed, Tesla stated that voltages could often be increased at an amazing 10,000 volts per inch of axial coil surface. This meant that a 24-inch coil could absorb radiant shockwaves, which initially measured 10,000 volts, with a subsequent maximum rise to 240,000 volts! Such transformations of voltage were unheard of with apparatus of this volume and simplicity. Tesla further discovered that the output voltages were mathematically related to the resistance of turns in the helix. High resistance meant higher voltage maxima.

He began referring to his disrupter line (following his disruptor) as his special “primary”, and to the helical coil placed within the shock zone, as his special "secondary". But he never intended anyone to equate these terms with those referring to magneto-electric transformers. This discovery was indeed completely different from magneto-induction. There was a real and measurable reason why he could make this outlandish statement. There was an attribute which completely baffled Tesla for a time.  Tesla measured a zero current condition in long copper secondary coils. He determined that the current, which should have appeared, was completely absent.  Pure voltage was rising with each inch of coil surface. Tesla constantly referred to his "electrostatic induction laws", a principle which few comprehended. Tesla called the combined disrupter and secondary helix a "Transformer".Tesla Transformers are not electro-magnetic devices; they use radiant shockwaves, and produce pure voltage without current.

Each experimental transformer conducted a specific impulse duration with special force.  Therefore each had to be "tuned" by adjusting the disrupter to that specific impulse duration. Adjustments of arc distance provided this control factor. Once a transformer was tuned to its own special response rate, impulses could flow smoothly through the system like gas flowing in a pipe.  Finding that gas-dynamic analogies and applications indeed provided him with a consistent record of successful assessments in these regards, Tesla began considering whether or not the white flame discharges, so different from anything he had every seen, might not be a gaseous manifestation of electro-static force.  There were certainly abundant experimental instances in which a purely gaseous nature, so unlike anything electrical, was being clearly made manifest. The manner, in which the radiant shockwave traveled over the coil in white laminar streams, brought a new revolution in thought. Voltage pulses traversed the secondary surface like a gas pulse under increasing constriction. Until reaching the free end of the coil, these gaseous pulses flowed over the copper surface rather than through it. Tesla referred to this specific manifestation as the "skin effect".  In this the discharge greatly resembled the manner of gases in motion over surfaces.

Furthermore, whenever a metal point was connected to the upper terminal of one of his Transformers, the stream became more directive. It behaved just like a stream of water in a pipe. When the white stream was directed at distant metal plates, it produced electronic charges. This charge production could be measured as amperage, "current", at the reception site. In transit however, no such amperage existed.  Amperage appeared only when intercepted.  Apparently pure Radiant Energy prevailed during the Voltage build up without current and when measured at the reception site showing that an electrical current of positrons now existed with the Radiant Energy.

The space surrounding Tesla’s Impulse Transformers so surges with these streams that the "interception current" can reach several hundred or even thousands of amperes.  This mysterious stream was composed of Radiant Energy.  Electricity composed of electrons does not have a smooth, soft, and flowing  nature? The electricity with which we are familiar is shocking, hot, burning, deadly, piercing, stinging, all the attributes of an irritant. But this discharge phenomenon was, cool or warm to the touch, soft and gentle. It would not kill.  Even the manner, in which the pulse exploded as bright white discharges of greatly transformed voltage, suggested the way in which gases behave when released from their confinements under pressure.  These reflective meditations convinced Tesla that this effect was not purely electrical in nature. Closely examining the white flames, Tesla realized why there was no measurable" electrical current" at the crown of these activated coils. The normal heavy charge carriers, electrons, could not travel as quickly as the radiant pulse itself. Choked in the metallic lattice of the coil, electrons became immobile. No electron current moved through the coil at all. The radiant pulse, which moved over the coil surface, was therefore not electrical in nature. But at the pickup point the current returned as a positron Cold Electric flow.

It was easy to control the brilliance of a room by controlling the voltage in Tesla’s transformers. The light from this sort of illumination was curiously bright to human perception, but nearly impossible to photograph on film. Tesla found it necessary to make long time exposures of his discharges before the faintest sort of streamers could be made visible. This strange inability to register photographically was contrasted against the brilliance perceived in the eyes, one which required delicate control. Tesla also designed, built, and utilized large globe lamps, which required only a single external plate for receiving the radiant energies. However distantly placed from the radiant source, these lamps became brilliantly illuminated. Theirs was a brilliance approaching that of an arc lamp, and exceeding any of the conventional Edison filament lamps by several factors. It was also easy for Tesla to control the heat of any space. By controlling both the voltage and impulse duration of energy in his Transformers, Tesla could heat up a room.  Cool breezes could also be arranged by appropriately setting the impulse duration.

The key to experimenting with Radiant Energy action was to secure a means for actually effecting deviations in the design mechanism, the very thing now possessed by Tesla alone.  The Tesla method used Radiant Energy to modify Radiant Energy! The secret was separating the contaminants including electrons from the current at the very source of generation, a feat that he had achieved in his Transformers and magnetic arc disrupters.  Tesla used the violence of magnetically disrupted arc discharges to cauterize electronic and Radiant Energy carriers from metal conductors. Breaking the agglomerations that bind them together, each component was free to separate. This condition could not be achieved in arc discharges where currents were allowed to alternate as in Tesla’s AC.

The extraordinary efficiency of the magnetic arc disrupter in developing Radiant Energy  currents derived from several principles. Tesla saw that normal electrical current was really a complex combination of Radiant Energy and electrons. When electricity was applied to the disrupter, a primary fractioning process took place. Electrons were forcibly expelled from the gap by the strong magnetic influence. The Radiant Energy streams, neutral in charge, remained flowing through the circuit however. The magnetic disrupter was his primary means for fractionating the electrons from the Radiant Energy particles.  Radiant Energy  particles are extremely mobile, virtually mass less when compared with electrons, and could therefore pass through matter with very little effort.  Electrons could not “keep up” with the velocity or the permeability of Radiant Energy particles. According to this view, Radiant Energy particles are infinitesimals, very much smaller than electrons themselves.  The Radiant Energy carriers contained momentum. Their extreme velocity matched their nearly mass less nature, the product of both becoming a sizable quantity. They moved with superluminal velocity, a result of their incompressible and mass less nature.  Whenever a directed radiant matter impulse begins from some point in space, an incompressible movement occurs instantly through space to all points along that path.  Such movement occurs as a solid ray, an action defying modern considerations of signal retardations in space. Incompressible ray lines can move through any distance instantly.   In effect, this stream of radiant matter, virtually mass less and incompressible, was a pure energy! Radiant Energy.

Here was a distinct phenomenon, one that did not in fact manifest with other than impulse applications. Tesla alternately called these expulsions “Radiant Matter” and “Radiant Energy” Neutral in charge and infinitesimal in both mass and cross-section, Radiant Energy is unlike any light seen since his work was concluded. If asked whether Radiant Energy can be compared with any existing physical item today, one would have to decline. We cannot draw parallels between Radiant Energy and the light energies with which science has long been preoccupied. But if light-like at all, Radiant Energy is possessed of qualities unlike any light, which we have learned to generate. And this is precisely the problem. Tesla Technology is Impulse Technology. Without the disruptive, unidirectional IMPULSE, there are no Radiant Energy effects. Generating this Radiant Energy requires special energetic applications, applications of succinct and brief impulses. These impulses must be generated through the explosive agency of a disruptive discharge, just as Tesla prescribed. The scientific community-at-large obviates these problems simply by denying the existence of the Radiant Energy because it doesn't fit within their intellectual model.

For those who are not familiar with Radiant Energy science, it might be useful to review some of the characteristics of the Radiant Energy Field. The Radiant Energy is made up of an extremely fine, mass-free fluid.  The Radiant Energy  penetrates all matter, flows around and through the planet in well defined ways, exhibits elastic characteristics, and spontaneously moves from low concentrations to high concentrations before discharging.  It is impossible to comprehend Tesla’s Technology apart from the controversial topic concerning Radiant Energy.

One area of the greatest confusion lies in the field of electrical science. The entire study of what has been called "static electricity' is just a confusing encounter with Radiant Energy and positrons as opposed to normal electricity which is composed of Radiant Energy and electrons.  When fully understood, so called "static electricity" will be seen to be neither static nor electricity.  Normal electricity always flows from high potential to low potential and usually requires metallic conductors to flow along.  On the other hand, "static electricity" does not discharge in the same way, and readily moves and collects on both conductors and insulators.  Because "static electricity" behaves more like Radiant Energy with positrons than normal electricity, ( Radiant Electricity with electrons) I am going use the term  Positron Electricity for this form of energy when it is present in wires and circuits. I call it Positron Electricity, to distinguish it from normal electron electricity.  In some ways, it behaves like electricity and in some ways it behaves differently. This has been the source of confusion. Up until now, most people have thought that there was only one kind of energy moving in electrical circuits, “electrons”.  This can now change. Electric appliances are designed to run on the discharge of electric potential from high to low, as in the draining of a battery to power a load.  Properly designed circuits employing Positron Electricity runs the appliance on the charging phase, as the energy spontaneously moves from low potential to high. Once the behaviors of Positron Electricity are clearly understood, it will be just as easy to run motors and lights as we now do from normal electron electricity.  Positrons are simply the positive form of the negative charged electron.

Power circuits that run on Cold Energy positrons for lighting and motive power are waiting to be perfected.  Researchers and developers should not concern themselves with the ideas presented as the so-called "Laws of Thermodynamics". The "First Law of Thermodynamics", with its ideas of conversion and conservation, is essentially incorrect. There is no way to convert mechanical energy into Radiant Energy, actually make one into the other.

This Technology calls into question the idea of conservation of energy. These experimental findings render the "First Law" without any basis in fact The real universe does not behave in accordance with these ideas. In the narrow case, the "Second Law' is really only a statement which describes the behavior of heat under certain circumstances. This much is basically true, as it is for under experimental observation.  In the general case, however, the "Second Law' is an intellectual extrapolation that does not accurately describe the behavior of physical reality under all circumstances.

The primary source for this article came from: Excepts from “Thermodynamics and Free energy”  by  Peter Lindemann.

✰* Revealed At Last: Ancient Invention Generates Energy-On-Demand

✔ Nikola Tesla’s method of magnifying electric power by neutralizing the magnetic counter-forces in an electric generator

Generates Energy-On-Demand: Easy Power Plan Will Change Our World Forever

✔ Currents are 180 out of phase with each other, Lenz's law naturally is broken
✔ Principle of Resonance to achieve Overunity